Skip to main content

Deployment checklist

Gather everything on this list before you start configuring Cpehub. Having these items ready avoids back-and-forth and makes deployment much faster. Check off items as you confirm them — this is just a visual aid, so reloading the page unchecks everything again.

Access and network​

  • Access to the Cpehub dashboard (administrator username and password).
  • Public IP or endpoint for the VPN tunnel between your network and Cpehub (WireGuard, IPSec/L2TP, or OpenVPN — coming soon).
  • A router/server on your side to terminate the VPN (Mikrotik, Linux, or Docker).
  • Firewall rules opened for VPN traffic and to reach the OLTs.

For each OLT​

  • Manufacturer and model (e.g.: Huawei MA5683T, ZTE C650).
  • Management IP of the OLT (IPv4 or IPv6) reachable through the VPN.
  • Console access: protocol (SSH or Telnet), port, username, and password. If there's an enable password, have that too.
  • SNMP: port (default 161) and the read-only community string.
  • Ability to configure SNMP Trap on the OLT pointing to Cpehub (for real-time events).

ERP integration​

  • Which ERP you use (IXC, SGP, or Hubsoft).
  • ERP API credentials (Token for IXC/SGP; Client ID/Secret + username/password for Hubsoft), generated in the ERP itself.
  • ERP URL/address.

ACS / TR-069​

  • Decide how the CPEs will find the ACS: automatic configuration, via OLT (OMCI), via firmware preset, or via DHCP Option 43.
  • CPE models in use and whether they support TR-069.
tip

You don't need 100% before starting. The minimum to see something working is: VPN + 1 registered OLT. The rest (ERP, ACS) you add afterward.

Next step​

With the checklist in hand, start with Communication (VPN) and then register your first OLT.